Columns for your outdoor installation – the choice is yours
Looking for a column for Zaptec Go the onepole column is the solution. For Zaptec Pro you can choose between two column solutions. All columns can be mounted with two chargers on one column, or you can use the column for one charger.
OUR COLUMNS
ONEPOLE 2.0
Zaptec offers eight readymade pedestals to meet your every EV charging needs. From one charging station up to four per pedestal. Including roof and options for area light. All made from high quality seawater resistant aluminium. Ready for any environment.
Onepole column works with both Zaptec Go and Zaptec Pro charging stations.
Material
Searesistant aluminum
Aluminum
Hydro
8,9kg
Surface treatment
Powdercoated
ISO 12944, Category C4
Measurement
1497x350x350mm
Protection class
Class I, must be connected to PE
Degree of protection
IK10 Color RAL9005 (Standard)
Electrical Connection
Connection point is in the charging stations back plate.
Connection between pedestals: ONEPOLE Connection kit.
Connection
5 pcs. 6×25/50mm² AI/CU.
Tested according to EN 60998-1:2004 and EN 60998-2-1:2004
Approved cross-section AL cable: 10-50mm²
Approved cross-section CU cable: 1.5-35mm²
Mounting
Up to two charging stations can be mounted on a single column without any additional brackets. To expand amount of chargers – additional brackets need to be attached.
Productsheet
Onepole 2.0 product sheet
Zaptec Column Premium
Zaptec Column Premium works with the Zaptec Pro charging station.
Size Single Zaptec Column Premium:
H: 1.460mm x B: 285mm
D: 112,9mm
Size Twin Zaptec Column Premium:
H: 1.460mm x B: 285mm
D: 210mm
Colour
Grey or Black
Material
Aluminium
Surface treatment
Powder coated
Protection class
Class I must be connected to PE
Degree of protection
IK10
Cable entry
Ø170x70mm in the bottom
Attach to ground
CC160mm, Ø22mm hole
Connection box
Included Abox-in 160-L, item no. 1243510
Included only in the twin column
Connection
Supplied coupling terminals, 5 pcs.
Elnr: 1221616, 1221617, 3x 1221615
Included only in the twin column
Mounting of charging station
The charging station’s backplate is attached to the column with 4 M4 nuts. (Supplied)
Lock the front cover
Standard panel lock, triangular
Productsheet
Zaptec Column Premium
Charging stations for EV charging in multifamily houses, apartment buildings and parking facilities
Your safety is essential to us. Zaptec Pro is a Type 2 charging station that manages high loads over time. Each charging station therefore has integrated fuses, electronic ground fault protection, temperature sensors and over-current and over-voltage monitors to ensure the highest level of safety for both the user and the power grid.